Precision Equipments

Product Details:

• High Precision longitudinal and transverse vials make it possible to check or level surfaces.
• 150MM (0.02MM/M)

Product Details:

RSK Block Level
LC 0.02MM/M

Product Details:

• High Precision instrument for accurate angle measurements on machine, molds, jigs.
• Can be attached to height gauges
• Range: -360 to +360
• Accuracy : ±2”(±0.03
• Repeatability : 1’
• Resolution: 1’ (0.01

Product Details:

• High Precision instrument for accurate angle measurements on machine, molds, jigs.
• Can be attached to height gauges
• Graduation: 5’
• Blade Length 150mm, 300mm
• W/60°, 45°, 30° edges.

Product Details:

Range from 2 Inch to 12 Inch

• Grade “0”
• Accuracy is upto 5 microns
• INOX Quality
• Very Sturdy

Product Details:

Range 50MM to 400MM

• Grade “0”
• Accuracy is upto 5 microns
• INOX Quality
• Very Sturdy

Product Details:

Granite Modelsp=plainc=center, E= Eccentricf=fine Adjustmentmodelbase Sizegranitegauging Measuring Cross Granite Basemmbase Typebracketheight (Mm)arm (Mm)lgs-1100 X 150pc10055lgs-2100x150pc (F)10055lgs-5150x150pc10055lgs-6150x150pc (F)10055lgs-8250x150pc15085lgs-9250x150pc (F)15085lgs-10250x150pe150150lgs-14300x200pc200115lgs-15300x200pc (F)200110lgs-16300x200pe200200lgs-20300x300pc250115lgs-21300x300pc (F)250110lgs-22300x300pe250200lgs-26300x300pdouble E250200lgs-27300x300puniversal Arm250lgs-28400x400pc300250lgs-29400x400pc (F)300250lgs-30400x400pe300250

Product Details:

Granite Surface Plate are manufactured using natural black granite stone, quarried from earth in its natural form. These precision granite surface plates are precision lapped to high standards of flatness to achieve accuracy and are used as bases for mounting sophisticated mechanical, electronic and optical gauging systems. Our quality inspectors and engineers put a strict vigilance at all the stages of the production procedure to ensure high quality surface plates. Further the final inspection is carried out as per IS-7327:2003 by a high precision computerized electronic level (Make: Wyler of Switzerland) . Our range of precision granite surface plates are utilized in precision tool rooms, engineering industries and research laboratories.

Some of the unique features of our granite surface plates are:

• Uniformity In Hardness
• Accurate Under Load Conditions
• Vibration Absorbent
• Easy To Clean
• Rust-Proof, Non-Corrosive
• Thermal Stability
• Wrap Resistant
• Low Porosity
• Non-Abrasive
• Non-Magnetic

Other Details:

• These advantages make black granite surface plates inherently stable and unmatchable against any other material. These surface plates are supplied with a calibration certificate traceable to National Physical Laboratory (NPL, Govt of India ) New Delhi.
• Rexin covers are provided with each surface plate for protection of top surface. We provide fabricated stand with leveling screws on request by our clients. The overall working height of surface plate with stand and leveling screw will be 900 mm (approx) from floor level.Option for vibration pads to control vibration is also available.

Product Details:

These are very & robust stand are used whenever the high-test measuring accuracy and an optimum rigidity is demanded. The extremely sturdy columns with the rigid guarantee high-test rigidity. Both stands have a novel clamping device for the
projection of scriber. "Crystal" Gauge has simple and rapid setting
of the stand and clamps and scriber in any position even at moderate tightening. A fine adjustment device allows rapid and easy setting at desired size. Suitable for pattern makers.

Specifications:

Product Details:

Digital Z Axiz Presetter
5MM Range

Product Details:

We offer a qualitative range of Cast Iron Bench Centers that are an accurate and quick method for inspecting radial run out of camshafts, crankshafts, and cylindrical shafts.
These are manufactured as per IS:5980-1978.

Some of the salient features of our Bench centers:

• The base of the bench center and its heads are stress relieved.

• One of the centers is spring loaded to ensure uniform pressure while holding and easy loading and unloading of work.
• Centers are made from high carbon steel hardened and ground finish, having morse taper MT-3 and are replaceable.
• Both heads are adjustable for easy and quick setting of the required distance between centers.
• The bed of the bench center is provided with two T-slots parallel to each other.

Product Details:

We Deal in a wide range of Plain Angle Plate, which is largely used in various industries for clamping and holding work in the vertical position. These plain angle plates are also used as a vertical reference for inspection and tooling purposes such as shaping, planning, milling, grinding, drilling, etc.

Product Details:

We Deal and supply a wide range of slotted angle plates, which are largely used in various industries for clamping and holding work in the vertical position.

Product Details:

Features:

• Used for precision measurement, setting of angles, right angle grinding and light machining.
• Made from high quality alloy steel.
• Accuracy for squareness, Flatness, & Parallelism is without 0.005mm.
• Angular accuracy within ±5 seconds.
• Center distance between rollers is within ±0.005mm.

Specification: